|
Comtek M216 Option P7
| |
|
| Wireless program monitoring
The M-216 Option P7 is the perfect on-the-go field transmitter offering directors, crew, and client reliable and superior sounding wireless program monitoring. For use with the PR-216 or PR-216 Option 7 wireless receivers, this portable, battery powered transmitter is built to withstand the most demanding needs of location sound monitoring.
Equipped with a flexible short whip antenna, the M-216 Option P7 offers superior RF transmission and a greater operating range.
Digitally synthesized, this multi-channel transmitter tunes 57 channels in the 216-217 MHz band and offers 5-channel compatibility for multi transmitter simultaneous operation.
|
It has an adjustable gain control and a single LED VU meter that offers a quick reference visual indication of the input level setting.
Built with performance in mind, the M-216 Option P7 provides the quality and dependability required by top sound mixers!
Audio Input: Aux/Line input impedance - 10 k ohm at 0 dB nominal
Connectors: Mini stereo 3.5 mm
Audio: Tip and sleeve
Battery Charging: + Tip, - sleeve
9 volt DC input: + Ring, - sleeve (with current limiting)
Controls and Indicators: Synthesized channel selection switches, power On/Off switch, optional microphone muting switch, audio input gain control, power/battery status indicator, audio (voice level) modulation indicator, companded auto/off switch (optional)
Frequency Response: 80 Hz to 10 kHz
Audio Distortion: Less than 1% at 80% modulation
Modulation Limiter: Soft compressor with 30 dB linear overload protection, attack time - less than 1 ms, recovery time - 10 ms
Frequency Modulation: 10 kHz deviation
Operating Radio Frequency: 57 synthesized frequencies in the 216-217 MHz LPRS band under FCC part 95
Out-of-Band Emissions: Better than 45 dB below carrier
R.F. Stability: 20 ppm XTL controlled
Digitally synthesized RF Power Output: 10 mW to antenna system
Antenna System: BNC
Current Drain: 18 mA constant current
Battery: 9 volt alkaline Eveready 522 or equivalent for up to 30 hours of operation
Dimensions: 1 1/16" x 2 1/4" x 3 1/2" (27 mm x 57 mm x 89 mm)
Weight: 5 ounces (140 grams)
FCC Compliance: Certification under Part 95
| 