|
|
|
Professional Sound DV Promix 1
| |
|
| DV Promix 1 Audio Production Tool
Download DV Promix 1 User Manual
The PSC DV ProMix 1 combines several features into one flexible audio tool for field production. The DV ProMix 1 contains a balanced XLR input with switchable 12T or 48PH microphone powering, followed by a very low noise microphone pre-amp with continuously variable gain and switchable low cut filter.
The DV ProMix 1 also incorporates a bright sunlight readable LED peak meter, a transformer balanced line driver and switchable limiters on both the pre-amp and the line driver amplifiers. In addition, the DV ProMix 1 features a monitor return amplifier with a balanced XLR input and continuously variable gain for flexibility. Headphone monitoring can be selected from Direct to both ears, Monitor to both ears, or a combination of the two.
|
The DV ProMix 1 will also accept an optional Boom Pole Remote slide fader like our AlphaMix for easy operation while booming. Power is provided by two, 9 volt batteries or external 7-16Vdc. A belt clip is provided.
The PSC DV ProMix 1 can be used for Boom operators feeding DV cams or other types of recorders, or for use as microphone to line amp or as a standalone limiter, or for radio remotes or as a mic power supply and pre-amp or in a host of other ways.
Features
Front Panel Features
- Monitor Return Gain (continuously variable, push pot)
- Pre-amp Gain (continuously variable, push pot)
- Headphone Volume (continuously variable, push pot)
- Power Switch, internal, off, external, two color LED indicates low battery
- Low Cut Filters, 80Hz, 20Hz (flat), 150Hz
- Limiters, Pre-amp and Line Driver Amp, on, off, 2 LED's indicate limit action
- Headphone Selection, D (direct), M (monitor return), D/M split ears
- RC (remote control) LED indicates when Boom remote is being used
- Fader, smooth ergonomic fader knob
- Output Meter, super bright multi color LED's, Peak reading
Rear Panel Features
- Headphone Jack, 1/4" stereo
- Boom Remote Connector, TA5M, for use with option boom remote slide fade
- Balanced Monitor Input, XLR-3 Female, excepts signals from -50dBv to +10dBv
- Balance Microphone Input, excepts signals from -65dBv to -5dBv
- 12T/48PH Switch, selects 12T, DYN or 48PH microphone power
- Mic/Line Switch, Selects output level, 0dBv, -10dBv, -40dBv
- Output Connector, transformer balanced, XLR-3-Male
- External Power, will operate from 7 to 16Vdc
Specifications
Size: 4.6" x 1.9" x 5.6" (11.6 cm x 4.8 cm x 14.2 cm)
Weight: 1 lb (0.45 kg)
Power: 2x 9V Batteries or External 7 - 16 VDC
Mic Power: 12T and 48PH to DIN Specs
Limiters: 1ms attack, 100ms release
Chassis: Aircraft Aluminum
Finish: Powder Coat, Black
Warranty: 1 Year, Limited
|
|
